Pristine Blue

 

 

Pristine Blue®️ Pool Care System for your Fairfield County Pool

Pristine Blue Pool Chemicals in CT

The Pristine Blue®️ Pool Care System for Crystal Clear Algae Free Pool Water

Pristine Blue®️ pool chemicals in CT, are an environmentally friendly alternative to chlorine for treating your pool water. Experience the joy of less skin and eye irritation, and jump right in within 15 minutes of adding any product. Relax and enjoy crystal clear blue pool water with the Pristine Blue’s complete line of pool water products including balancers and accessory products.

PristineBlue®️, the cornerstone of the system, contains an active ingredient that is bonded with a unique carrier which allows the introduction of enough sanitizer into the water to control both bacteria and algae. PristineBlue®️ is environmentally friendly; EPA registered. It is so good that it is even certified for the addition to drinking water by NSF International!
After an initial dose of Pristine Blue®️, you’ll only measure the level of PristineBlue®️ every two weeks and “top it off” with more PristineBlue®️. The active ingredient in PristineBlue®️ stays suspended in the water constantly to prevent the growth of algae and bacteria. Never again experience a chlorine demand!
 

Perry Pools + Pristine Blue Weekly Pool Care

Perry Pools provides a free Pristine Blue computerized water analysis for your pool water along with a free maintenance calendar recommendation.  Enjoy an environmentally friendly alternative to chlorine and bromine for treating your spa or hot tub. Experience the joy of less skin and eye irritation and soak within 15 minutes of adding any product.
 
Pristine Blue for your Pool

PristineBlue®️, the cornerstone of the system, controls of algae and kills bacteria. The active ingredient in PristineBlue®️ is bonded with a unique carrier which allows the introduction of enough sanitizer to the water to control both bacteria and algae. PristineBlue®️ is environmentally friendly; EPA registered and is so good it is even certified for the addition to drinking water by NSF International! After an initial dose, you’ll measure the level of PristineBlue®️ every two weeks and “top it off” with more PristineBlue®️. The active ingredient in PristineBlue®️ stays suspended in the water constantly to prevent the growth of algae and bacteria.
 
When you need chemicals for your pool in Connecticut make Perry Pools your first choice.

Going Low-Chlorine is easier than ever with PristineBlue®

Water treated with PristineBlue® feels softer and looks inviting without a chemical taste or odor. It’s gentle to equipment and won’t bleach your liner or swimsuit. You can swim immediately after application. Your eyes won’t burn…and you won’t believe how good your skin and hair feel after swimming! And it’s easy! The long-lasting formula of PristineBlue® lets you escape the chore of daily water testing and maintenance.

Why Consider Going Low-Chlorine?

In swimming pools, spas and swim spas, many people don’t like the chemical odor and taste of chlorinated water. The disadvantages of chlorine are many and range from minor to serious. It bleaches vinyl liner pools and swimsuits, it irritates eyes and skin, you have to wait to use the pool after you’ve added chlorine, it’s hazardous to store, it can corrode pool equipment and it’s harmful to the environment.

Chlorine dissipates quickly and therefore requires vigilant testing and maintenance. Swimmers can develop reactions to chloramines, which are chlorine by-products, ranging from skin irritation to respiratory problems. Some research studies have even linked chlorine use in indoor pools to asthma! And those are just the minor complaints!

PristineBlue® Is One Such Alternative!

PristineBlue® is a low-chlorine chemical system which provides pool owners with many advantages. It’s gentle on eyes and skin, won’t bleach vinyl liners and your family can swim immediately after application. PristineBlue® is used to control algae and nonpublic health bacteria, and bacteria that cause odor problems in residential swimming pools, spas, and hot tubs. PristineBlue® is environmentally friendly, EPA registered as an algaecide/bactericide and certified for addition to drinking water by NSF International.

The long-lasting formula of PristineBlue® requires attention just once every 2 weeks, and just a few ounces are needed, not gallons or pounds.

PristineBlue® does not dissipate, so it’s very cost effective because every drop works against algae and bacteria in your pool, spa or swim spa. Overall, the cost of maintaining your water on PristineBlue® for 1 year is about the same or less as running your water on chlorine.

PristineBlue® is a low-chlorine chemical system which provides pool, spa or swim spa owners with many advantages. It’s gentle on eyes and skin, won’t bleach vinyl liners and your family can swim immediately after application. PristineBlue® is used to control algae and nonpublic health bacteria, and bacteria that cause odor problems in residential swimming pools, spas and hot tubs. PristineBlue® is environmentally friendly, EPA registered as an algicide/bactericide* and certified for addition to drinking water by NSF International.

Application rate: For pools add 2 ounces per 1,000 gallons. For spas add 6 milliliters per 100 gallons. Test the PristineBlue® level every 2 weeks with the PristineBlue® Mini Test Kit and “top off”.

PristineBlue® 32oz. – Call for pricing
PristineBlue® 64oz. – Call for pricing

PristineCheck® is a water prep that gets your pool, spa or swim spa ready for the introduction of PristineBlue®. It’s essential to backwash or clean the filter after the use of PristineCheck®.  If your source water is high in calcium, we recommend an application of PristineCheck® whenever you add makeup water to the pool, spa or swim spa.

Application Rate: For pools add 2 ounces per 1,000 gallons. Filter for 24 hours; then backwash the filter or remove and clean the cartridge.

Application Rate: For spas add 10 milliliters per 100 gallons. Filter for 4 to 6 hours; then remove and clean the filter media.

PristineCheck® 32oz. – Call for pricing
PristineCheck® 64oz. – Call for pricing

PristineClean®ensures sparkling clean surfaces in your pool, spa or swim spa by inhibiting scale formation and stains caused by metals in the water. It prevents the metal and mineral particles that enter your pool, spa or swim spa through hoses, jewelry and metal equipment from bonding to walls and other surfaces. PristineClean® is added every 2 weeks along with PristineBlue®. PristineClean® may also be used to remove existing metal stains on surfaces.

Application rate: For pools add 2 ounces per 10,000 gallons every 2 weeks. For spas add 1 milliliter per 100 gallons every 2 weeks.

PristineClean® 32oz. – Call for pricing
PristineClean® 64oz. – Call for pricing

PristineClear® clears cloudy water in pools,  spas and swim spas bringing suspended particles together enabling the filtration system to better remove the particles. PristineClear® is suitable for all pH levels.

Application rate: For pools add 2 ounces per 10,000 gallons every 2 weeks.  Filter for 24 hours and then backwash the filter or remove and clean the cartridge.

Application rate: For spas add 1 milliliter per 100 gallons. Filter for 4 to 6 hours and then remove and clean the filter media.

PristineClear® 32oz. – Call for pricing
PristineClear® 64oz. – Call for pricing

PristinePower® is a ph buffered “shock” and low-chlorine oxidizer. It dissolves quickly and removes odors and organic materials, contaminants and body oils that otherwise build up and cause cloudy or dull water. Weekly or biweekly shocking is recommended for pools. In spas we recommend a dose of PristinePower® after each use of the spa, not to exceed once per day. It is safe for swimmers to enter the water after 15 minutes!

Application rate: For pools add 1 pound per 10,000 gallons, weekly or every 2 weeks. For spas add 5 milliliters (or 1 teaspoon) per 100 gallons after each use of the spa, not to exceed once per day.

PristinePower® 1lbs call for pricing
PristinePower® 5 lbs call for pricing

PristineExtra® is a 99% sodium di-chlor shock that is used in the start up of PristineBlue®. It dissipates rapidly and may be used for troubleshooting.

Application rate: For pools add 1 pound per 10,000 gallons at start up. For spas add 5 milliliters (or 1 teaspoon) per 100 gallons at start up.

PristinePower® 1lbs call for pricing

PristinepHDown™ contains sodium bisulfate. This product decreases the pH and total alkalinity of pool, spa or swim spa water.

PristinepHDown™ 6lbs call for pricing

PristinepHUp™ contains sodium carbonate. This product increases the pH of pool, spa or swim spa water.

PristinepHUp™ 6 lbs call for pricing

PristineAlkUp™ contains sodium bicarbonate. This product increases the total alkalinity of pool, spa or swim spa water.

PristineAlkUp™ 5 lbs call for pricing

PristineMist™ prevents and eliminates odor and discoloration to the underside of the spa cover.

Application rate: Spray the spa cover every 4 to 6 weeks.

PristineMist™ call for pricing

PristineBlue® Mini Test Kit measures the PristineBlue® level in your water so you can calculate your “top off

PristineBlue® Mini Test Kit call for pricing

PristineStrips™ allow you to monitor your pool, spa or swim spa’s total alkalinity and pH.

PristineStrips™ call for pricing

The PristineBlue® Spa Kit contains 6 of the components of the PristineBlue® system.

Contains:

  • 1-8 ounce container of PristineBlue®
  • 1-8 ounce container of PristineCheck®
  • 1-8 ounce container of PristineClean®
  • 1-8 ounce container of PristineClear®
  • 1-8 ounce container of PristineExtra®
  • 1-10 ounce container of PristinePower®
  • 1-Spa measuring cup
  • 1-Spa Care Guide

The Small Pool Start Up Kit contains the products needed to get your chlorine pool started on PristineBlue®. It is for pools up to 16,000 gallons.

Contains:

  • 1-32 ounce container of PristineCheck®
  • 1-32 ounce container of PristineBlue®
  • 2-1 pound bags of PristineExtra®
  • 1-Pool measuring cup
  • 1-PristineBlue®

Small Pool Start Up Kit call for pricing

The Large Pool Start Up Kit contains the products you need to get your chlorine pool started on PristineBlue®. It is for pools up to 32,000 gallons.

Contains:

  • 1-64 ounce container of PristineCheck®
  • 1-64 ounce container of PristineBlue®
  • 1-4 pound container of PristineExtra®
  • 1-PristineBlue®

    Large Pool Start Up Kit call for pricing

    *Nonpublic Health Bacteria